FORWARD ENGINE MODULE LIFTING SLING INSTALLATION AND REMOVAL (Sheet 1 of 1)

TM 9-2835-255-34

FORWARD ENGINE MODULE LIFTING SLING INSTALLATION AND

REMOVAL (Sheet 1 of 1)

TOOLS: Hoist, 1000-pound minimum capacity (Item 11, Appendix D)

Lifting sling (Item 7, Appendix D)

PERSONNEL: TWO

INSTALLATION:

1. POSITION SHACKLE (1) AND HOOK

SLING (2) TO HOIST HOOK (3).

NOTE

If moving forward module (4), do steps a and c. If

moving forward module (4) with gearbox module (5),

do steps b and c.

a. Install shackle (1) in second hole (6) from

short cable (7).

b. Install shackle (1) in fourth hole (8) from

short cable (7).

c. Hook sling (2) to hoist hook (3).

2. INSTALL SLING (2).

a. Aline sling (2) with module (4).

b. Remove pin (9) from shackle (10). Aline

shackle (10) with block (11) and install

pin (9).

c. Install hook (12) on pin (13) and take

slack out of sling (2).

REMOVAL:

REMOVE SLING (2).

a. Lower sling (2) until cables (7, 14) are

slack.

b. Remove hook (12) from pin (13).

c. Remove pin (9) from shackle (10). Remove

shackle (10) and install pin (9) in

shackle (10).

d. Remove sling (2) from hoist hook (3).

End of Task

5-12