|
|
![]() TM 9-2835-255-34
3-2. TROUBLESHOOTING - CONTINUED
(3)
ES-19. ENGINE OIL CONSUMPTION IS
d. ENGINE - CONTINUED
MORE THAN ONE QUART PER HOUR. -
CONTINUED
CONTINUED FROM STEP 5
Check adapter and shaft
assembly seal rings (1) for
evidence of oil leakage
(carbon buildup).
Is there evidence of oil leakage
past sealing rings?
Go to step 9.
7 Check seal rings (1) to see if
end gaps (2) are positioned 180
degrees apart.
Were seal ring end gaps 180 degrees
apart?
A. Replace adapter and
shaft assembly seal
rings (page 8-22.5)
B. Replace No. 7 bearing
seal (page 6-22.1)
C. Verify problem is solved.
A. Reposition sealing rings
(1) so that end gaps (2)
are 180 degrees apart.
B. Verify problem is solved.
CONTINUED ON NEXT PAGE
Change 6
3-160
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |