|
|
TM 9-2815-224-34&P
Engine Tune-Up Instructions (Cont)
INJECTOR RACK CONTROL LEVER ADJUSTMENT (CONT).
19-6.
a. Adjustment.
NOTE
Buffer screw will turn with locknut.
(1) Loosen buffer screw (1) by turning locknut (2) until face (3) of locknut (2) is 5/8-in. (15.89 mm)
from governor housing (4).
NOTE
Adjustment is same for right and
left hand cylinder head banks.
Right hand clevis lever is
disconnected to adjust left
cylinder number one.
(2) Remove cotter pin (5) and
clevis pin (6) from fuel rod (7)
and injector rack clevis
lever (8).
(3) Loosen two nuts (9) from
throttle delay (10).
TA357564
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |