 |
|||
|
|
|||
|
|
|||
| ||||||||||
|
|
 TM 9-2815-224-34&P
Fan Clutch Maintenance Instructions (Cont)
18-2. FAN CLUTCH REPAIR (CONT).
(43) Support bearing retainer (31) with suitable blocking.
(44) Apply lubricating oil to bearing race (33).
(45) Press bearing race (33), thin edge up, into place using
tool No. (2) until tool No. 2 contacts bearing retainer (31).
(46) Apply lubricating oil to oil seal (32) and install fan
hub (27) in bearing retainer (31).
CAUTION
Before installing bearing, make sure blocking is under fan
hub or damage to bearing retainer may result.
(47) Support fan hub (27) with suitable blocking.
(48) Apply lubricating oil to bearing (34).
(49) Press bearing (34), numbered side up, over fan hub (27)
into bearing retainer (31) using tool No. 10 until tool
No. 10 contacts bearing retainer.
(50) Install spacer (35) and retaining ring (36).
CAUTION
Before pressing fan hub, make sure blocking is installed under
bearing retainer. not fan hub, or damage to fan hub may result.
(51) Support bearing retainer (31) with suitable blocking.
(52) Press fan hub (27) down l/16-in. (1.5 mm) using tool No. 3 to
seat bearing (34) against spacer (35) and retaining ring (36).
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals