Assembly. - TM-9-2815-224-34-P0463

TM 9-2815-224-34&P

Fan Clutch Maintenance Instructions (Cont)

c. Assembly.

WARNING

Adhesives, solvents, and sealing compounds

can burn easily, can give off harmful vapors,

and are harmful to skin and clothing.To avoid

injury or death, keep away from open fire and

use in well-ventilated area. If adhesive,

solvent, or sealing compound gets on skin or

clothing, wash immediately with soap and

water.

Coat three fittings (1, 2, and 3) with pipe

(1)

thread sealing compound and install on

bracket and shaft assembly (4).

NOTE

There are two models of bracket and shaft assemblies. Model A has no wear

sleeve. Model B has a wear sleeve. Model B replaces Model A and is supplied with

wear sleeve already installed. If installing a new Model B bracket and shaft

assembly, skip steps (1.1) through (1.3). If replacing wear sleeve on existing Model

B bracket and shaft assembly, do steps (1.1) through (1.3).

(1.1) Apply plastic gasket to outside diameter of shoulder of bracket and shaft assembly (4) and inside

diameter of wear sleeve (4.1).

(1.2) Support bracket and shaft assembly (4) with suitable blocking.

(1.3) Press wear sleeve (4.1) on shoulder of bracket and shaft assembly (4) using wear sleeve

installation tool.

Change 2