|
|
TM 9-2815-224-34&P
Aftercooler Maintenance Instructions (Cont)
16-2.
AFTERCOOLER REMOVAL/INSTALLATION (CONT).
Secure aftercooler (2) with eight lock bolts (6). Do not tighten.
(4)
WARNING
Adhesives, solvents, and sealing compounds can burn easily, can give off harmful
vapors, and are harmful to skin and clothing. To avoid injury or death, keep away
from open fire and use in well-ventilated area. If adhesive, solvent, or sealing
compound gets on skin or clothing, wash immediately with soap and water.
Apply silicone adhesive-sealant to flange to elbow (7), hose (8), and connector (9).
(5)
NOTE
Some engines have two bolts, lockwashers, and washers. Others have two flanged
head bolts. Refer to TM 9-2320-279-24P
Install elbow (7) and gasket (10) with two bolts (11), lockwashers (12), and washers (13). Do not
(6)
tighten bolts (11).
Install hose (8) and connector (9) on elbow (7).
(7)
Tighten hose clamps (14).
(8)
Tighten two bolts (11) to 15 lb-ft (20 Nm).
(9)
Tighten eight lock bolts (6) to 15 lb-ft (20 Nm).
(10)
C.
Follow-on Maintenance.
Install blower (para 14-3).
(1)
Start engine and check engine operation (TM 9-2320-279-10)
(2)
END OF TASK
Change 2
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |