Installation. - TM-9-2815-224-34-P0411

TM 9-2815-224-34&P

Engine Governor Maintenance Instructions (Cont)

(7') Install two bushings (11), preformed packing (12),

washer (13), copper washer (14), and retaining ring (15)

on speed control lever shaft (10).

e . Installation.

NOTE

Apply a light coat of grease to both sides of

gasket before installing.

(1) Install gasket (1) on governor housing (2).

NOTE

When installing governor cover assembly,

speed control lever shaft pin fits into fork of

lever.

(2) Install governor cover assembly (3) with

five screws (4) and lockwashers (5).

(3) Install engine stop solenoid (6)

with washer (7), Iockwasher (8),

and nut (9).

f. Follow-on Maintenance. Install

throttle control air cylinder (para 15-8).

END OF TASK

15-19