Follow-on Maintenance. - TM-9-2815-224-34-P0406

TM 9-2815-224-34&P

Engine Governor Maintenance Instructions (Cont)

15-3. GOVERNOR REPAIR (CONT).

(41) Position lockwasher (53) with tab facing

into housing (2).

(42) Install washer (54) into housing (2).

(43) Position lockwasher (53) and screw (55).

(4-4) Install bearing retaining screw (55).

(45) Tighten bearing retaining screw (55) to

20 lb-ft (27 N-m). Bend tang on

lockwasher (53) against head of bearing

retaining screw.

(46) Install gasket (56) inside governor

housing (2).

CAUTION

Apply small amount of sealing compound.

Excess could get in bearing causing bearing

failure.

(47) Apply pipe thread sealing compound to

threads of plug (57) and install plug in

governor housing (2). Tighten plug to

45 lb-ft (61 N.m).

(48) Install pin (58).

d . Follow-on Maintenance.

(1) Install variable low speed limiting governor (para 15-6).

(2) Install blower (para 14-3).

END OF TASK

15-14