GOVERNOR REPAIR.

TM 9-2815-224-34&P

Engine Governor Maintenance Instructions (Cent)

15-3. GOVERNOR REPAIR.

This task covers:

c. Assembly

a. Disassembly

d. Follow-on Maintenance

b. Cleaning/Inspection

INITIAL SETUP

References

Models

None

All

Equipment Condition

Test Equipment

None

Condition Description

TM or Para

Blower removed.

Special Tools

Para 14-3

Variable low speed limiting

Para 15-6

None

governor removed.

Supplies

Special Environmental Conditions

Compound, sealing, pipe thread, Item 32,

None

Appendix C

Solvent, dry cleaning, Item 60, Appendix C

General Safety Instructions

Tags, identification, Item 61, Appendix C

None

oil, lubricating, Item 48, Appendix C

Grease, automotive and artillery, Item 36,

Level of Maintenance

Appendix C

General Support

Personnel Required

MOS 63W, Wheel vehicle repairer

a. Disassembly.

NOTE

Engines after serial number 8VF- 106635 will not have starting aid screw and

locknut.

(1)

Mount governor housing (1) in vise with soft jaws.

Remove plug (2) and gasket (3) from governor housing (1).

(2)

(3)

Bend tang of lockwasher (4) away from head of bearing retaining screw (5).

Remove bearing retaining screw (5), lockwasher (4), and washer (6).

(4)