Follow-on Maintenance. - TM-9-2815-224-34-P0379

TM 9-2815-224-34&P

Turbocharger Maintenance Instructions (Cont)

NOTE

Some vehicles have a washer, lockwasher,

screw, and nut. Others have a washer,

lockwasher, flanged screw, and nut.

Connect clip (21) to bracket (22) with

(16)

washer (23), lockwasher (24),

screw (25), and nut (26).

Slide four clamps (27) over two exhaust

(17)

tubes (28).

Install two exhaust tubes (28) on

(18)

tee (12) and two exhaust manifolds (29).

Tighten four clamp nuts (30).

(19)

Follow-on Maintenance.

Connect air intake duct to turbocharger (TM 9-2320-279-20).

(1)

Connect exhaust pipe to turbocharger (TM 9-2320-279-20).

(2)

Connect batteries (TM 9-2320-279-20).

(3)

Start engine and run at idle for ten minutes (TM 9-2320-279-10).

(4)

Check turbocharger gaskets and ducts for leaks.

(5)

Increase engine speed and listen for smooth operation of turbocharger.

(6)

Shut off engine (TM 9-2320-279-10).

(7)

Install engine top cover (TM 9-2320-279-20).

(8)

END OF TASK

14-43

Change 2