 |
|||
|
|
|||
|
|
|||
| ||||||||||
|
|
 TM 9-2815-224-34&P
Turbocharger Maintenance Instructions (Cont)
14-6. TURBOCHARGER REMOVAL/INSTALLATION (CONT)
(7) Install two screws (6) and
lockwashers (7) in
turbocharger (5).
(8) Tighten screws (6) to 45 to 50 lb-ft
(61 to 67 Nm).
(9) Position two clamps (3), one over
air inlet adapter (2) and one over
turbocharger (5).
(10) Tighten clamps (3).
Fill center housing (8) with lubricating oil
(11)
through fitting (9).
Connect oil tube (10) to fitting (9) and tighten
(12)
nut (11).
Install tee (12), gasket (13), four nuts (14), and
(13)
lockwashers (15) on turbocharger (5).
NOTE
Some engines have a connector. Others have an elbow. Refer
to TM 9-2320-279-24P
Connect oil hose (16) to elbow (17).
(14)
NOTE
Some engines do not have screw, lockwasher, and clip. Refer to
TM 9-2320-279-24P
Install clip (18) with screw (19) and lockwasher (20).
(15)
14-42
Change 2
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals