Disassembly-continued - TM-9-2815-224-34-P0351

TM 9-2815-224-34&P

Blower Maintenance Instructions (Cont)

NOTE

Six puller screws must be 1/4 in.-20 x

1-1/4 in. (32 mm) or longer.

(17) Install three screws and aline two

puller tools to rear end plate (29).

(18) Turn both puller screws (15) evenly

and remove rear end plate (29).

(19) Remove puller tool from rear end

plate (29).

(20) Remove two screws (26) from front end

plate (23).

(21) Tag front end plate (23) and indicate top. Tag

front end of blower housing (31) and indicate

top.

(22) Remove front end plate (23) by tapping with

mallet.

CAUTION

Handle rotors with care to avoid

scratching surfaces.

NOTE

Tag rotors before removal.

(23) Remove right rotor (32) and

left rotor (33).