 |
|||
|
|
|||
|
|
|||
| ||||||||||
|
|
 TM 9-2815-224-34&P
Fuel Injector Maintenance Instructions (Cent)
c. Cleaning/Inspection.
WARNING
Adhesives, solvents, and sealing compounds can burn easily, can give off harmful
vapors, and are harmful to skin and clothing. To avoid injury or death, keep away
from open fire and use in well-ventilated area. If adhesive, solvent, or sealing
compound gets on skin or clothing, wash immediately with soap and water.
(1) Clean all metal parts with dry cleaning solvent.
WARNING
Compressed air used for cleaning purposes will not exceed 30 psi (207 kPa). Use
only with effective chip guarding and personal protective equipment
(goggles/shield, gloves, etc.).
(2) Use compressed air to dry all metal parts.
(3) Inspect all parts for damage.
(4) Replace damaged parts.
d. Assembly.
(1) Install bracket (1) and spacer (2) on injector control tube (3).
(2) Install right injector control tube clevis (4) with pin (5).
12-33
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals