Disassembly-continued - TM-9-2815-224-34-P0316

TM 9-2815-224-34&P

Fuel Injector Maintenance Instructions (Cont)

12-5. INJECTOR CONTROL TUBE REMOVAL/INSTALLATION (CONT).

(7') Remove bracket (12) and return spring (13) from right injector control tube (14).

(8) Loosen locknut (15) and screw (16), and remove control lever (17). Remove locknut and screw.

(9) Remove spring (18) from control lever (17).

NOTE

All three remaining control levers are removed the same.

(lo) Remove spring (19) from second control lever (20).

(11) Loosen locknut (21) and screw (22) and remove second control lever (20). Remove locknut and

screw.

(12) Remove pin (23) and right injecot control tube clevis (24).

(13) Remove spacer (25) and bracket (26) from right injector control tube (14).

12-32