Assembly-continued - TM-9-2815-224-34-P0299

TM 9-2815-224-34&P

Fuel lnjector Maintenance Instructions (Cont)

Look through bore of injector body (2) and move injector rack (5) until punch marks (6) on teeth

(9)

are visible.

Aline timing mark (7) on gear (8) between two punch marks (6) on rack (5).

(10)

Install gear (8), recheck alinement from step (9), and repeat step (9) if necessary to get proper

(11)

alinement.

Install sleeve spacer (9).

(12)

NOTE

There are two colors of preformed packings. Model A is black and Model B is red.

Either packing may be used.

Install preformed packing (10) on shoulder of injector body (2).

(13)

Aline pin (11) in bushing (12) with slot in injector body (2) and slide end of bushing into injector

(14)

body.

Install spill deflector (13) over barrel of bushing (12).

(15)

12-17

Change 2