Follow-on Maintenance. - TM-9-2815-224-34-P0192

TM 9-2815-224-34&P

Valve Mechanism Maintenance Instructions (Cont)

7-6. CAM FOLLOWER/PUSH ROD REMOVAL/INSTALLATION (CONT).

(4) Position cam follower (8) so oil hole points

away from exhaust valves (9).

(5) Install cam follower (8) over push rod (7)

and into cylinder head (2).

(6) Install other push rods (7) and cam

followers (8) in same manner.

(7) Install cam follower guide (10), two screws (11), and

(8) Tighten screws (11) to 15 lb-ft (20 NZm).

NOTE

There must be 0.005-in. (0. 13 mm) clearance

between cam follower guide and cam follower.

(9) Insert 0.005 in. 013 mm) feeler gage

between cam follower guide (10) and legs of

cam followers (8).

(10) If there is not enough clearance, loosen

screws (11), move guide (10), and repeat

steps (8) and (9).

c. Follow-on Maintenance.

(1) Install exhaust valve bridge (para 7-8).

(2) Install rocker arms (para 7-5).

(3) Install cylinder head (para 3-7).

TA357681

END OF TASK

7-14