Installation-continued - TM-9-2815-224-34-P0161

TM 9-2815-224-34&P

Flexplate and Flywheel Housing Maintenance Instructions (Cont)

NOTE

Screws are numbered to show tightening sequence. Screws must be tightened in

order.

(30 Tighten first six screws in flywheel housing (1) to 90 to 100 lb-ft (122 to 136 NM).

(31) Tighten seventh through ninth screws to 40 to 45 lb-ft (54 to 61 Nm).

(32) While Soldier A turns crankshaft screw (49) clockwise, Soldier B tightens tenth through twelth

screws to 10 to 45 lb-ft (5.4 to 61 Nm) then tells Soldier A to stop turning Screw (49).

(33) Tighten thirteenth through twenty seventh screws to 25 to 30 lb-ft (34 to 41 Nm).

Tighten screw (9) on right side of engine to

(34)

40 to 45 lb-ft (54 to 61 Nm).