Removal. - TM-9-2815-224-34-P0148

TM 9-2815-224-34&P

Flexplate and Flywheel Housing Maintenance Instructions (Cont)

5-3. FLYWHEEL HOUSING AND REAR OIL SEAL REMOVAL/INSTALLATION (CONT).

Removal.

Install two lifting eyes,

(1)

support flywheel housing (1) with suitable lifting device.

(2)

Remove three screws (2), lockwashers (3), washers (4), and left bank bracket (5)

(3)

Remove three screws (6), lockwashers (7), washers (8), and right bank bracket (9).

(4)

NOTE

Tag and mark screws (10), (12), (14),

and (16).

(5) Remove six screws (10) and

washers (11) from flywheel

housing (1).

(6) Remove six screws (12) and

lockwashers (13) from

flywheel housing (1).

(7) Remove four screws (14)

and washers (15) from

flywheel housing (1).

Remove three screws (16)

(8)

and washers (17) from

flywheel housing (1).

NOTE

Screws (18), (21), (26), (29), (31),

(34), and (37) and washers (19), (22),

(27), (36), (32), (35), and (38) must

not De reused.

5-4

Change 2