Assembly. - TM-9-2815-224-34-P0059

TM 9-2815-224-34&P

Engine Block Maintenance Instructions (Cont)

c. Assembly.

WARNING

Adhesives, solvents, and sealing

compounds can burn easily, can

give off harmful vapors, and are

harmful to skin and clothing. To

avoid injury or death, keep away

from open fire and use in

well-ventilated area. If adhesive,

solvent, or sealing compound gets

on skin or clothing, wash

immediately with soap and water.

Coat threads of all serviceable

plugs, fittings, and draincocks with

pipe thread sealing compound and

transfer to new engine block.

(1) Install core pIug (1) and gasket (2) inside air box (3). Tighten plug to 230 to 270 lb-ft (312 to

366 Nm).

(2) Install two 1/4-in. oil galley plugs (4) in top of engine block (5); Tighten plugs to 14 to 16 lb-ft

(19 to 22 Nm).

If no pressure test (Section d. Testing) is to be

performed, do next step, otherwise go on to

Step (4).

(3) Install aftercooler water inlet adapter (6)

and gasket (7) using aftercooler water inlet

adapter installer. Tighten aftercooler water

inlet adapter to 230 to 270 lb-ft (312 to

366 Nm).

TA357785