INSTALLATION-continued - TM-9-2815-221-34-P0165

CRANKSHAFT AND GEARCASE BACKPLATE REPAIR (CONTINUED)

NOTE

Make sure thrust bearing washer oil grooves

face center of cylinder block. Use grease (item 10,

Appx C) to hold in place.

D Place rear thrust bearing washer (5) between retaining pins

on rear bearing plate (6).

Install two new paper gaskets (7) and

steel

shim (8) over crankshaft (4).

Install thrust bearing washer (5) and rear bearing plate (6)

with two bolts

and washers (10).

(9) to 40-45

1235

3-127

TM 9-2815-221