INSTALLATION - TM-9-2815-221-34-P0164

3-126

CRANKSHAFT AND GEARCASE BACKPLATE REPAIR (CONTINUED)

INS

Apply heavy coat of

(item 16, Appx C) to bearing journals

and oil finished surfaces of crankshaft.

NOTE

Make sure thrust bearing washer oil grooves face

center of cylinder block. Use grease (item 10,

Appx C) to hold in place.

Install thrust bearing washer (1) between retaining pins (2)

and inside cylinder block (3).

CAUTION

Make sure thrust bearing washer stays in posi-

tion between retaining pins. Washer may be

damaged if out of position.

Insert crankshaft (4) through rear opening of cylinder block

into thrust bearing washer and front main bearing. Rotate

crankshaft to allow counterweights to clear cylinder block

openings.

1234