|
|
FUEL INJECTION PUMP
REPAIR (CONTINUEDI
NOTE
If pump is being removed for replacement, or
when replacing button, record code number on
original button. Record port closing (PC) dimen-
sions stamped on pump mounting flange. These
dimensions are required for timing replacement
pump engine.
REMOVAL
Remove bleed valve (l).
A
NOTE
Do not remove stud bolts unless damaged.
Remove four nuts (2),
and flat washers (4)
B
from stud bolts (5). Discard
(3).
I
CAUTION
Do not damage or lose shims. Shims must be in-
stalled with original fuel injection pump.
c
Remove fuel injection pump (6) and shim(s) (7).
Remove and discard preformed packing (8).
D
NOTE
Note shim thickness stamped on cylinder block
(above injection pump).
0884
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |