ROCKER ARM REPAIR

ROCKER ARM REPAIR

REMOVAL

A Remove four rocker arm locknuts (1) and balls (2).

B Remove four rocker arms (3).

CLEANING , INSPECTION ANO REPAIR

See page 3-39.

INSTALLATION

NOTE

Make sure four pushrods ( 1) are in socket ends of

rocker arms.

A Install rocker arms (2) on studs (3).

B Install balls

and locknuts (5) on

C Starting at No. 1 cylinder exhaust rocker arm (2), tighten

locknuts (5) in order until all play is removed from rocker arms.

D Adjust valves (p 4-19).