FIGURE 230. REMOVING FUEL INJECTION TUBES AND CLAMPS.

degree elbow from cylinder No. 6 fuel

injector nozzle and holder assembly.

(E) Remove two 5/16 x 2-1/2 cap screws

and 5/16-inch lock washers securing

each hold- down clamp securing fuel in-

jector nozzle and holder assembly to

cylinder head. (F) Remove hold-down

clamp from each fuel injector nozzle

and holder assembly.

FIGURE 230. REMOVING FUEL INJECTION

TUBES AND CLAMPS.

(2) Figure 231. (A) Disconnect and remove

fuel return-to-fuel injection pump over-

flow valve tube from 1/4-inch tube tee

in nozzle and holder assembly. (B) Dis-

connect and remove five fuel injector

nozzle fuel return tubes from the l/4-

inch tube tees in fuel injector nozzle and

holder assemblies. (C) Remove the five

1/4-inch tube tees from cylinder No. 1

FIGURE 232. REMOVING FUEL INJECTOR

through 5 fuel injector nozzle and holder

NOZZLE AND HOLDER ASSEMBLIES.

assemblies. (D) Remove 1/8 x 1/4, 90

FIGURE 231. REMOVING INJECTOr NOZZLE FUEL RETURN TUBES AND

NOZZLE AND HOLDER ASSEMBLY HOLD-DOWN CLAMPS.

153