|
|
desired. These tools are of chief value to main-
tenance organizations engaged in rebuilding a
large number of identical components; however,
The improvised tools listed in Table II and
they are not essential for rebuild and are not
the dimensional detailed drawings apply only to
available for issue. This data is furnished for
field and depot shops to enable these maintenance
information only.
organizations to fabricate these tools locally if
Use
Item
Reference
1. Gage, depth
Installing water pump impeller on shaft.
2. Pin
Removing or installing clutch release levers and
Figs. 36, 453,
yoke of clutch.
and 459
Adjusting clutch release levers.
Figs. 34, 449,
3. Plate
461, and 462
4. Replacer
Installing exhaust valve seat insert.
Installing intake valve seat insert.
5. Replacer
Installing water pump pulley on shaft.
6. Replacer
Release spring tension on clutch release levers.
7. Spacer blocks
274, 447, 460,
461, and 483
Torque tighten cylinder head nuts after engine
8. Wrench, box
run- in.
Removing or installing injection pump hub nut.
Figs. 38 and 73
9. Wrench
32
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |