Figure 6-177. Removing injection pump drive gearshaft.

1. Remove advance flyweight adjusting ring (A),

flyweights, and oil control housing from flyweight

Figure 6-177. Removing injection pump

housing as an assembly.

drive gearshaft.

2. Disconnect and remove flyweight extension helical

springs (B) from flyweight extension.

3. Remove flyweights (C) from adjusting ring.

Note. Note position of flyweights as they must

be installed in their original position to assure

proper operation.

4. Separate adjusting ring (A) and remove from oil

control housing.

Figure 6-178. Removing advance flyweight

adjusting ring and flyweight.

6-147