Figure 5-89. Removing or installing fire extinguisher tube-engines prior to new tube and clamps

Remove

Install

1. Remove self-locking nut (A) attaching loop clamp to

1. Install two loop clamps on fire extinguisher tube (C)

front fan drive housing.

and position tube in engine.

2. Remove self-locking nut (B) attaching loop clamp to

2. Position clamps as shown and install self-locking nut

rear fan drive housing,

(B) securing one clamp to rear fan drive housing.

3. Remove fire extinguisher tube (C) and clamps,

3. Install self-locking nut (A) Becuring second clamp to

Remove two clamps from tube.

front fan drive housing.

4. Remove two cap screws (D) and lock washers and

4. Remove two cap screws (D) and lock washers from

remove breather tube support bracket from fuel in-

fuel injection pump. Install breather tube support

jection pump. Reinstall cap screws and lock washers in

bracket on pump and secure with two cap screws and

pump.

lock washers.

Figure 5-89. Removing or installing fire extinguisher tube-engines

prior to new tube and clamps.

5-54