Figure 5-65. Removing or installing fuel injector tube clamps-engines with additional clamps.

2. Position two tube clamps, one under and one over fuel

Remove

injector tubes, and plate on top of each clamp at angle

1. Remove eight self-locking nuts (A) and bolts. Remove

brackets. Install four self-locking nuts (E) and bolts

four plates and eight tube clamps from four left tube

securing clamps.

clamp supports.

3. Position two clamps, one under and one over fuel

2. Remove four self-locking nuts (B) and bolts. Remove

injector tubes, and one plate under and one over each

two plates and four tube clamps from double tube

clamp at location shown. Install four self-locking nuts

clamp support.

3. Remove four self-locking nuts (C) and bolts. Remove

(D) and bolts securing clamps.

four plates and tube clamps.

4. Position two clamps, one under and one over outer

4. Remove four self-locking nuts (D) and bolts. Remove

two fuel injector tubes at location shown, and one plate

four plates and tube clamps.

under and one over each clamp. Install four self-locking

nuts (C) and bolts securing clamps.

5. Remove four self-locking nuts (E) and bolts. Remove

two plates and four tube clamps from angle brackets.

5. Position two clamps, one under and one over fuel

injector tubes and one plate on top of each clamp at

6. Remove six self-locking nuts (F) and bolts. Remove

double tube clamp support. Install four self-locking

three plates and six tube clamps from three right tube

clamp supports.

nuts (B) and bolts securing clamps.

6. Position two clamps, one under and one over fuel

Install

injector tubes, and plate on top of each clamp at each

1. Position two tube clamps, one under and one over fuel

left tube clamp support. Install eight self-locking nuts

injector tubes, and plate on top of each clamp at each

(A) and bolts securing clamps.

right tube clamp support. Install six self-locking nuts

(F) and bolts securing clamps.

Figure 5-65. Removing or installing fuel injector tube

clamps-engines with additional clamps.

5-38