Figure 5-44. Removing or installing cylinder baffle-cylinder No. l R

Disconnect

1. Disconnect fire extinguisher tube (A) from adapter.

2. Remove nut (B) attaching adapter to shroud and

remove adapter.

3. Disconnect fuel injection pump fuel inlet hose (C)

from bulkhead elbow.

4. Remove nut (D) and external teeth lock washer at-

taching bulkhead elbow to shroud. Remove elbow and

Remove

flat washer.

1. Remove two plate nuts (A) from cylinder baffle.

S. Remove four nuts (E). external teeth lock washers.

2. Remove cylinder baffle (B).

and machine screws attaching fuel injection pump fuel

cutoff lead to shroud. Remove lead from shroud.

Note. Cylinder baffles for cylinder Nos. lR

Connect

and 6L are-identical and are removed or installed

1. Position fuel injection pump fuel cutoff lead through

in the same manner.

shroud. Install four nuts (E), external teeth lock

washers, and machine screws securing lead to shroud.

Install

2. Position bulkhead elbow and flat washer in shroud.

1. Position cylinder baffle (B) over cylinder.

Install nut (D) and external teeth lock washer securing

2. Install two plate nuts (A) on cylinder baffle.

elbow to shroud.

3. Connect fuel injection pump fuel inlet hose (C) to

Figure 5-44. Removing or installing cylinder

bulkhead elbow.

baffle-cylinder No. l R .

4. Position adapter in shroud and install nut (B)

securing adapter to shroud.

5. Connect fire extinguisher tube (A) to adapter.

Figure 5-45. Disconnecting or connecting

fire extinguisher and fuel inlet tubes-

front shroud.

5-24