Figure 4-21. Removing or installing upper oil filler tube support bracket and turbosupercharger end shroud

Disconnect

1. Disconnect turbosupercharger oil inlet hose elbow

from nipple using open end wrench - 5120-448-0404

(A).

2. Remove self-locking nut and bolt (B) attaching inner

shroud plate to transmission oil cooler end shroud.

Remove

Connect

1. Remove two self-locking nuts and bolts (A).

1. Install self-locking nut and bolt (B) securing inner

2. Remove upper oil filler tube support bracket (B) from

shroud plate to transmission oil cooler end shroud.

bolt (relocated oil filler tube installation only).

2. Connect turbosupercharger oil inlet hose elbow to

3. Remove turbosupercharger end shroud (C).

nipple using open end wrench - 5120-448-0404 (A).

Install

1. Position turbosupercharger end shroud (C) over

Figure

4-22.

Disconnecting

connecting

turbosupercharger.

2. Position upper oil filler tube support bracket (B) on

turbosupercharger oil inlet hose elbow from

one bolt (A) relocated oil filler tube installation only).

nipple using open end wrench-

3. Install two bolts (A) and self-locking nuts securing

5120-448-0404.

end shroud. Bolt with support bracket must be installed

at top of shroud.

Figure 4-21. Removing or installing upper

oil filler tube support bracket and

turbosupercharger

end

shroud.

4-12