 |
|||
|
|
|||
|
|
|||
| ||||||||||
|
|
 TM 9-2520-270-34
23.
IF MEASUREMENT IN STEP 11
WAS WITHIN 0.021-0.060 INCHES
(0.533-1.524 mm), GO TO STEP 27.
IF NOT, GO TO STEP 24.
24.
IF SECOND RANGE BRAKE
ASSEMBLIES WERE REPLACED IN
STEPS 14 OR 15, GO TO STEP 25.
IF NOT, GO TO STEP 27.
22. REMOVE ELBOWS (1) AND (2).
a. Remove elbow (1) and preformed
25. REPAIR SINGLE DISK BRAKES (4)
packing (3) from brake (4).
AND (6). See task REPAIR
Discard packing.
S E C O N D RANGE SINGLE DISK
b. Remove elbow (2) and preformed
BRAKES, page 4-441.
packing (5) from brake (6).
Discard packing.
26. GO TO STEP 29.
INSTALL
27. INSPECT TWO PADS (7) ON
EACH BRAKE (4) AND (6).
a. Inspect two pads (7) on each brake (4)
and (6) for damage, See page 2-5.
b. If pads (7) are damaged, go to
step 28. If not, go to step 29.
28. REPAIR
SINGLE DISK BRAKES (4)
AND (6).
See task REPAIR
29. INSTALL ELBOW (1) AND PREFORMED
SECOND
RANGE SINGLE DISK
PACKING (3). See task INSTALL ELBOW
BRAKES,
(45 AND 90), page 2-179.
4-436
Change 3
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals