|
|
TM 9-2520-270-34
32 REPAIRER AND HELPER PLACE
31. REMOVE TWO WOOD BLOCKS FROM
TWO WOOD BLOCKS (2) (ITEM 2)
U N D E R OUTPUT HOUSING (1).
UNDER CARRIER ASSEMBLY (3).
CAUTION
WARNING
Do not scratch carrier shaft surface when
Retaining ring is installed
installing retaining ring. Equipment can be
under high tension. Use care
damaged.
when removing and installing
retaining ring. Personnel can
34. INSTALL NEW WASHER (5) AND
b e injured. Always wear
RETAINING RING (4).
goggles.
a. Install washer (5) on shaft (6).
33. REMOVE RETAINING RING (4).
b. Using retaining-ring pliers, install
a. Using retaining-ring pliers, remove
retaining ring (4) sharp-face up in
retaining ring (4).
groove (7) on shaft (6),
4-344
Change 2
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |