 |
|||
|
|
|||
|
Page Title:
INSTALL ROTATING SERVICE BRAKE PLATE |
|
||
| ||||||||||
|
|
 TM 9-2520-270-34
CAUTION
Do not install brake plates without coating
with transmission oil. Equipment can be
damaged.
NOTE
Plates should be installed in the same order and
facing same way as removed.
52. INSTALL ROTATING SERVICE
BRAKE PLATE (1).
a. Coat plate (1) with transmission oil
before assembly.
b. Aline plate splines (2) with splines on
carrier assembly (3).
c. Install plate (1) so it is facing
the same way as removed.
53. REPEAT STEPS 51 AND 52 UNTIL
10 STATIONARY PLATES (4) AND
9 ROTATING PLATES (1) ARE
INSTALLED.
55. INSTALL WASHER (9) AND BOLT (10).
a. Coat threads of bolt (10) with sealant
compound.
b. Using 3/8-inch drive brace handle and
3/8-inch socket, install washer (9) and
bolt (10) in hole (6).
54. INSTALL RETAINER PLATE (5).
a. Install plate (5) with bolt hole (6)
56. USING 3/8-INCH DRIVE TORQUE
facing screw hole (7).
W R E N C H AND 3/8-lNCH SOCKET,
b. Install retaining ring (8) with slot
TORQUE BOLT (10) TO 60-75 in-lb
alined with hole (6).
(69-86 cmkg).
GO TO NEXT PAGE
4-291
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals