 |
|||
|
|
|||
|
|
|||
| ||||||||||
|
|
 TM 9-2520-270-34
47. INSTALL INNER SPRING RETAINER (3),
a.
Aline retainer (3).
b.
(H) Hold retainer (3) down.
c.
Using 3/8-inch drive brace handle and
7/16-inch socket, install six
washers (4) and screws (5). Tighten
six screws two turns at a time to
evenly compress springs (2).
48. USING 1/2-lNCH DRIVE TORQUE
45. INSTALL SPRING RETAINER PLATE (1).
WRENCH WITH ADAPTER,
EXTENSION, AND 7/16-lNCH SOCKET,
TORQUE SIX SCREWS (5) TO
46. PLACE 10 SPRINGS (2) ON
10-12 ft-lb (1-2 mkg).
RETAINER (1).
CAUTION
D o not install brake plates without
coating with transmission oil. Equipment
can be damaged.
51. INSTALL STATIONARY SERVICE
BRAKE PLATE (9).
a. Coat plate (9) with transmission oil
49. INSTALL REMAINING SIX PINS (6).
before assembly.
b. Aline plate tabs (10) with pins (6).
50. PLACE RIGHT-HAND OUTPUT
c. Install plate (9) so it is facing same
CARRIER ASSEMBLY (7) IN OUTPUT
way as removed.
HOUSING (8).
4-290
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals