 |
|||
|
|
|||
|
|
|||
| ||||||||||
|
|
 TM 9-2520-270-34
24. REPAIRER AND HELPER TURN
HOUSING (1) OVER.
25. INSPECT TAPERED ROLLER CUP (2).
a. Inspect cup (2) for damage.
See TM 9-214.
b. If cup (2) is damaged, go
to step 26. If not, go to step 28.
26. R E P L A C E RIGHT-HAND OUTPUT
28. INSPECT ENCASED SEAL (3).
MECHANICAL HOUSING (1). RECORD
FAILURE ON DA FORM 2407 AND
a. Inspect seal (3) for scoring, cuts, or
RETURN DEFECTIVE HOUSING TO
other damage. See page 2-5.
DEPOT.
b. If seal (3) is damaged, go to step 29.
27. GO TO STEP 32.
If seal is not damaged, go to step 30.
CAUTION
Do not mar housing while prying out seal.
Damage to equipment can occur.
29. REMOVE SEAL (3).
a. Using screwdriver, pry out and
discard seal (3).
30. CLEAN RIGHT-HAND OUTPUT
M E C H A N I C A L HOUSING.
a. Clean housing and piece parts.
See page 2-2.
31. INSPECT RIGHT-HAND OUTPUT
M E C H A N I C A L HOUSING.
a. Inspect housing, piece parts,
and inserts, See page 2-5.
b. Replace housing if damaged. Record
failure on DA FORM 2407 and
return defective housing to depot.
c. Repair inserts if damaged. See task
R E P A I R RIGHT-HAND OUTPUT
HOUSING INSERTS, page 4-308.
GO TO NEXT PAGE
4-285
Change 2
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals