 |
|||
|
|
|||
|
|
|||
| ||||||||||
|
|
 TM 9-2520-270-34
CAUTION
Two "C" clamps are under spring pressure.
Use care when removing "C" clamps. Failure
to do so can result in loss of parts.
2. REMOVE BACKUP PLATE (1), FOUR
CLUTCH FRICTION PLATES (2), AND
F O U R CLUTCH SEPARATOR
PLATES (3).
Plates must be installed in same
a.
order as removed.
b.
Loosen two "C" clamps (4) evenly.
c.
Remove two "C" clamps (4).
d.
Remove backup plate (1), four friction
plates (2), and four separator
plates (3).
WARNING
Compressed air can injure
you and others. Do not aim air
at soldiers. Do not use more
pressure than 20 psi (138 kPa).
Always wear goggles.
4. SEPARATE THIRD RANGE CLUTCH
PISTON (6) FROM HOUSING (7).
a. Remove piston (6) from housing (7)
by applying air pressure to oil
port (8) in bushing (9).
b. Remove and discard preformed
3. REMOVE EIGHT SPRINGS (5).
packing (10).
4-212
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals