 |
|||
|
|
|||
|
|
|||
| ||||||||||
|
|
 TM 9-2520-270-34
50. INSTALL NEW ROLLER BEARING (1).
a. If bearing (1) was removed, go to
step 50b. If not, go to step 52.
b. Coat bearing support (2) with engine oil.
c. Using plastic-faced hammer install
bearing (1).
d. install spiral retaining ring (3) in
groove (4).
51. INSTALL BEARING INNER RACE (5) ON
SPUR GEAR (6).
a. Place bearing inner race (5) on gear
hub (7) with thickwall portion of race
facing gear (6).
b. Use bearing installer (Item 14A), press
bearing inner race (5) on gear hub (7).
52. INSTALL SPUR GEAR (6) WITH BEARING
INNER RACE (5) INTO ROLLER
BEARiNG (1).
WARNING
R e t a i n i n g ring is installed
under high tension. Use care
when removing and installing
retaining ring. Personnel can
be injured. Always wear
goggles.
CAUTION
Cross shaft spur gear may be loose and may
fall off. Damage to equipment can occur.
53. ATTACH SPUR GEAR (6). HAVE HELPER
ASSIST.
a. (H) Helper hold housing (8) in upright
position while holding spur gear (6).
install bearing end plate (9) on spur
b.
gear (6) bevel side out.
c . Using retaining ring pliers, install
retaining ring (10) in groove (11).
4-194
Change 4
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals