 |
|||
|
|
|||
|
|
|||
| ||||||||||
|
|
 TM 9-2520-270-34
7. CHECK SPRINGS (1).
a. Using indicator caliper, measure
free length of springs (1). Replace
6. REMOVE 12 SPRINGS (1) AND
any spring that has a free length
SPRING GUIDE PINS (2).
of less than 1.328 inches (33.73 mm).
10. REMOVE 3 CLUTCH PLATES (6), 2
FRICTION CLUTCH PLATES (7), AND
12 SPACERS (8).
8.
TURN PLATE ASSEMBLY (3) OVER.
a.
Remove 1 clutch plate (6) and
12 spacers (8).
9.
CHECK PLATE ASSEMBLY (3).
b.
Remove one friction clutch plate (7),
a. Using micrometer caliper set, measure
second clutch plate (6) and second
diameter of pilot (4) on hub (5).
friction clutch plate.
b. Replace plate assembly (3) if meas-
c.
Using plastic-faced hammer, tap last
urement is less than 2.245 inches
clutch plate (6) to loosen. Remove
(57.023 mm).
clutch plate.
4-54
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals