 |
|||
|
|
|||
|
|
|||
| ||||||||||
|
|
 TM 9-25200-270-34
14. INSPECT STEERING ARM ASSEMBLY (1)
FOR BINDING.
a. If assembly (1) moves freely in ball
slot (2) and connecting link (3) moves
freely in slot (4), go to END OF TASK. If
not, go to step 15.
15. REPAIR CONTROLLER STEERING
CONTROL ARM, page 3-46.
CAUTION
Two types of controllers exist. Do not install
an HMPT 500-3 controller on an HMPT 500
transmission. Damage to equipment can
occur.
Do not set controller on workbench top side
up. Keep hands free of internal controller
parts. Use care when setting controller down
to prevent damage to controller parts.
16. REMOVE PLUG (5).
a. (H) Hold controller assembly (6) on side
during removal of plug. (5).
b. Using 3/8-inch drive ratchet handle and
5/16-inch socket wrench attachment,
remove plug (5) and preformed
packing (7). Discard packing.
c. Repairer and helper place controller
assembly (6) on workbench bottom side
up.
3-36
Change 3
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals