 |
|||
|
|
|||
|
|
|||
| ||||||||||
|
|
 TM 9-2520-270-34
9. INSTALL CAP (2) WITH ELEMENT (1).
a.
Remove rag and push cap (2) with
8. INSTALL ELEMENT (1) ON CAP (2).
element (1) into hole in controller
a. Coat two new preformed packings (3)
assembly (5).
and o-ring (4) with transmission oil.
b. Aline four screw holes (6) in cap (2)
b. Install two new packings (3) on cap (2).
with screw holes (7) in controller
c. Install new o-ring (4) in top of
assembly (5).
element (1).
c.
Using plastic-faced hammer, tap and
d. Install element (1) on cap (2).
seat cap (2) into place.
10. INSTALL FOUR NEW LOCK
WASHERS (8) AND SCREWS (9).
11. USING 3/8-lNCH DRIVE TORQUE
W R E N C H AND 7/16-lNCH
SOCKET, TORQUE FOUR SCREWS (9)
TO 85-110 in-lb (98-127 cmkg).
END OF TASK
Change 1
3-7 (3-8 blank)
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals