Flatten washer

Figure 5-16 (Step 16).

Using improvised output flange removing tool (A)

Figure 5-14 (Step 14).

attached to output flange (B), hold tool (A) to keep

Flatten washer (A) securing flange bolt (B)

flange stationary, and pull flange from shaft.

Using puller assembly 5120-572-8712 (8356201)

pull rear output oil seal (B) from bore in housing

(C).

Figure 5-15 (Step 15).

Using a 3/4 inch wrench and an improvised holding

tool (A), remove flange bolt (B), flat washer (C),

and seal ring (under washer).