Install three 3/8-16 x 21/1-inch bolts

TM 9-2520-249-34& P

114 Install gasket (1) over the guide bolts. Install oil

transfer plate (2) over the guide bolts.

112 Install two 3/8-16 x 4-inch, headless guide bolts

(3 and 4) in bevel gear housing and position

gasket (5) over the guide bolts. Attach lifting

sling (1), (25, table 3-1) to bevel gear housing

cover assembly (2).

Install the top cover

assembly on the guide bolts. Remove the sling.

Install low-range clutch piston (6) with its

sealrings.

115 Place nylon ball (1) in hole (2) in the oil transfer

plate. Fill the hole over the ball with oil-soluble

grease.

113 Install three 3/8-16 x 21/1-inch bolts (1, 5 and 7)

and eleven 3/8-16 x 21/-inch bolts (2, 3, 4 and

6), 14 plain washers and 14 lockwashers.

Tighten

the

bolts

finger

tight.

8-39