Install bearing retainers

TM 9-2520-249-34&P

78 Install bearing retainers (1), flat side first, with

the lip fitting into the groove in bearing (2).

80 Using a chisel, bend each end of the lockstrips

(1 and 2) against a flat side of the bolt heads.

79 Install four lockstrips (1 and 3) and eight 5/16-24

x 1 1/4-inch bolts (2). Tighten bolts (2) to 14 to

18 pound feet torque.

81 Install stator assembly (1). thin edges of stator

vanes first. onto ground sleeve spline (2).

NOTE

Check for freedom of clockwise

rotation.

Stator should lock if

counterclockwise

rotation

attempted.

8-29