Install ten 3/8-16 x 2 1/4-inch bolts

TM 9-2520-249-34& P

74 Install ten 3/8-16 x 2 1/4-inch bolts (1) and four

76 Install retaining ring (1) to retain the diaphragm

3/8 -16 x 3-inch bolts (2 and 3), 14 plain

assembly.

washers and 14 lockwashers. (Remove guide

bolts.) Tighten bolts to 20 to 24 pound feet

77 Install two 5/16-24 x 3-inch, headless guide

75 Install large, O-type sealring (1) into the

bolts (1) into the hub of pump drive gear (2).

converter housing. Retain the seal ring with oil

Install gasket (3). Install torque converter pump

soluble grease. Install diaphragm assembly.

assembly (5) onto bearing (4). Remove the two

(2), convex side first, with seal (3) installed, into

guide bolts.

the housing. Seat the diaphragm by tapping

around its circumference.

8-28