Install lifting bracket

TM 9-2520-249-34& P

61 Install four 5/16-18 x 1 1/2-inch bolts (1), four

plain washers and four lockwashers. Tighten

the bolts to 10 to 12 pound feet torque.

60 Install lifting bracket(1) nineteen 3/8-16 x 2 1/4-

inch bolts (2), two 3/8-16 x 2 1/2-inch bolts (5),

21 plain washers and 21 lockwashers. The two

bolts (5) at the bottom are installed from the

output housing into the end cover. Tighten the

bolts to 29 to 32 pound feet torque. Install

speedometer cover gasket (3) and cover (4).

62 Position the torque converter housing, front

downward,

wood

blocks.

Install

intermediate-range clutch piston assembly (1),

with seal rings, flat side first, into converter

housing (2). Make certain that two seal rings (3)

are installed on sleeve (4).

8-24