Install output driven oil pump assembly

TM 9-2520-249-34&P

55 Install output driven oil pump assembly (1) on

53 Using a blunt rounded tip chisel, bend

output housing (2).

lockwasher (1) against a flat side of bolt head

(2) opposite hole in plate (3).

56 Install five 5/16-18 x 3-inch bolts (2) and five

plain washers. Tighten the bolts to 10 to 12

pound feet torque. Install two 3/8-24 x 3 3/4-

54 Using a punch, bend washer (1) down into hole

inch bolts (1) and two plain washers. Tighten

(2) of lock plate (3).

the bolts to 33 to 40 pound feet torque.

8-22