Install eight 3/8-16x1 3/4-inch, selflocking bolts

TM 9-2520-249-34&P

10. Install four 3/8-16 x 1 1/2-inch bolts (1), two 3/8-

8. Install eight 3/8-16x1 3/4-inch, selflocking bolts

16 x 3-inch bolts (2) and six flat washers.

(1) gear assembly flange (2). Tighten the bolts

Tighten the bolts to 20 to 24 pound feet torque.

to 36 to 43 pound feet torque. Check the free

Refer to paragraph 8-9, above, for determining

rotation of the bevel gears, using wrench

proper backlash and gear tooth contact pattern.

assembly (3), (30, table 3-1).

Check the

backlash and gear tooth contact as outlined in

11. Install sump cover gasket (1) and cover (2)

Install sixteen 3/8-16 x 1 1/2-inch bolts (3). 16

9. Install brake coolant pump assembly (1) (refer

lockwashers and 16 plain washers. Tighten the

to para 8-9, above) into bevel gear housing

bolts to 20 to 24 pound feet torque. Install

assembly (3). Be sure gear (2) is meshed with

magnetic drain plug (4) and gasket (5).

the bevel drive gear on cross shaft (4) before

the pump seats.

8-9