|
|
TM 9-2520-249-34& P
Section XIX. RIGHT AND LEFT OUTPUT CLUTCH
ASSEMBLIES-REPAIR
7-110. Description
Refer to paragraph 2-16 for description of the right and
left output clutch assemblies.
NOTE
The right and left output clutch
assemblies are identical, therefore, only
the left clutch is described in the
following procedures.
a. Position the output clutch assembly in a press
and apply sufficient force against the piston housing to
relieve pressure on the snapring. Remove the snapring
Figure 7-36. Removing output clutch piston
and piston housing
c. Remove the piston, with its outer sealring, from
the piston housing (fig. 7-37).
Figure 7-35. Removing (or installing).output
clutch piston housing snapring.
b. Release the press and remove the output clutch
piston housing and piston as a unit (fig. 7-36).
Figure 7-37. Removing output clutch piston
from piston housing.
7-33
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |