Assembly - TM-9-2520-249-34-P0119

TM 9-2520-249-34& P

Figure 7-22. Removing bevel drive gear rear bearing

Figure 7-23. Installing bearing inner race onto hub of

outer race.

bevel pinion carrier

7-82. Cleaning

b. Install the rear bearing outer race into the bevel

Refer to paragraph 5-2 for cleaning recommendations.

drive gear, using replacer (19. table 3-1). Press the

race until it is firmly seated in the gear (fig. 7-24).

7-83. Inspection and Repair

Refer to paragraph 5-3 for general inspection and repair

recommendations.

7-84.

Repair Standards

a. Refer to paragraph 5-4 for explanation of

repair standards.

b. Refer to repair standards (table 7-12).

7-85.

Assembly (FO-5)

a. If inner race of bearing assembly (35) was

removed from bevel pinion carrier (32), install a new

replacement. Using replacer (20, table 3-1), press the

bearing inner race onto the hub of the carrier until it is

firmly seated (fig. 7-23).

Figure 7-24. Installing rear bearing outer race into bevel

drive gear

7-21