Remove left cross shaft bearing retainer

TM 9-2520-249-34& P

shims. Record the thickness of the shim pack. Remove

the jackscrews.

NOTE

Before removing the shims, identify any

one bolt hole in the housing with a

corresponding hole in the shims for

proper indexing during assembly.

92 Using three of t he bolts removed as jackscrews (1),

loosen left bearing retainer assembly (2)

94 Using a 9/16-inch socket wrench, remove 13 self-

locking bolts (1) and plain washers from right

bearing retainer assembly (2).

Remove left cross shaft bearing retainer (1).

Remove shims (2); tie them together and identify them

as to location, to prevent loss or confusion with other

6-26